Small Tube Squeezing Machine Membrane Panel Welding Machine For Boiler Pipe

Small Tube Sizing Machine Membrane Panel Welding Machine for Boiler Pipe

1. Model

● This equipment is designed simply as C type and has 9 oil cylinders for hydraulic drive.

● It is used to squeeze and calibrate small heated elbow on the same level. A qualified 180°elbow of Φ=76mm thickness=12.7mm R=1.5D can be squeeze to R=0.6D and achieve technical requirement.

2. Technical detail

● Pipe diameter: D=Φ32-Φ76mm
● Pipe thickness: 3-12.7mm
● The bend radius of 180° elbow before squeezing: R=1.5D
● The bend radius of 180° elbow after squeezing: R=(0.6-1.2) D
● The maximum open distance of clamp made: L=400mm
● Squeeze pressure: F= 45t
● Calibration pressure: F=120t
● Hydraulic system pressure: N=16Mpa
● Pump power: N=18.5kw

3. Constitute

● C-type frame (lathe bed), have nine oil cylinder, hydraulic transmission
● Calibration cylinder maximum180t
● Back pressure cylinder
● Left and Right squeeze mechanism
● Up/down of under mode calibrated by slide
● Mainly uses PLC control, heating control in the same panel, simple operation, low failure rate. Use sensor to test squeezing distance

4. Parts supplied

tube sizing machine

steel pipe bending machine

Small Tube Squeezing Machine Membrane Panel Welding Machine For Boiler Pipe Images